Drain Jetting for Blocked Drains

Drain jetting uses controlled water flow and suitable nozzles to clear certain blockages and deposits from drains.

HomeDrain Jetting for Blocked Drains

Drain Jetting for Blocked Drains enquiry

Drain jetting for blocked drains uses controlled water flow and suitable nozzles to clear certain obstructions and deposits. Jetting is unsuitable for some blockages, so pipe condition, access and the likely material need checking first.

Water-jetting hose reels and equipment fitted inside a service van

Nozzles and water flow

Jetting performance depends on the nozzle, available water flow, deposit and pipe condition.

After jetting

Restored flow does not repair structural damage, so recurring problems may still need inspection.

Water flow, nozzle choice and debris

The nozzle directs jets through the pipe to break up or move deposits. Flow and operating pressure need to suit the bore, pipe material and obstruction. Silt or other loosened material may need recovering so it does not settle again further downstream.

Portable drainage inspection monitor beside a sewer access point.

Contact us about drain jetting

Complete the form and we will get back to you.

Checking the drain after jetting

Once the obstruction has been cleared, we check drainage and consider any visible or suspected damage. Jetting can remove deposits but cannot seal a crack or correct a displaced joint.

Limits of drain jetting

Unexpected resistance or signs of fragile pipework call for reassessment rather than simply increasing pressure. Small internal waste pipes and some structural faults are better approached with different equipment or further inspection.

Drain Jetting for Blocked Drains: common questions

Is jetting suitable for every blocked fixture?

No. Small waste pipes, vulnerable connections and some solid obstructions need a different method.

Does jetting repair cracks or displaced joints?

No. Jetting removes deposits; structural defects need separate repair.

Can jetting remove grease from a drain?

It can remove suitable grease deposits where the pipe and access make jetting appropriate.

Can jetting damage fragile pipework?

An unsuitable jetting method can, which is why the pipe condition and material matter.

Is material recovery sometimes needed?

Yes. Dislodged silt or debris may need collection so it does not form another blockage downstream.

Drain Unblocking

Services

Request a quote

Menu

Get a quote